Level Sensors for Man-made Fibre Industry
The main element from which man made fibre is produced is the polymer. The industry is developed tremedously as consumption of fibre increases for making clothes etc. Our solution is available for various stages of manufacturing process of fibre which withstand in any condition.
Storage Chip Silo
Wet Chips Hopper
After entering into the storage chip silo, the chips are convey to the small hopper. The small hopper is connected to the conveying pipes which forces the chips to enter into the wet chips hopper with the support of blowers. As the wet chips are stick to the level sensor probe so SLA Series is advised to use as it is immune to coating of application material.
The drying hopper dries the material chips by heated dry air. The chips are fed at the top of the hopper then it moves slowly to the bottom at the same time the dry air travelling from bottom to top and moisture dispersed inside the chips and thus drying the chips. For independent pump control action MPILC is a convenient solution.
Dry Chips Hopper
After drying chips into the drying hopper, it should be stored in the separate hopper known as dry chips hopper from where it is convey to the extruder. The dry chips can be detected easily and Orbit has adjustable switching sensitivity which can be changed according to material.
Spin Finish Tank
The dried chips are melted at 270℃ to make a liquid solution then the syrup like solution is fed into the container called spinneret and an external force is applied to its tiny holes which are usually circle or may be changed to other shapes to produce fibre. SLC is immune to build-up and Elixir ensures longer life span.